Status pages and uptime badges — share uptime publicly
There are two ways to show people outside your account whether things are up:
- a status page: a public web page listing the monitors and devices you choose, with their current state, availability, a bar per day and recent incidents;
- an uptime badge: a small image with one monitor's availability in it, for a README, a wiki page or your own website.
Both are read-only. Visitors see only the names you type, and you can switch either off at any time.
Create a status page
On the Monitors page, choose Status pages, then New status page.
- Title (up to 60 characters) and an optional Intro (up to 280), for example Ordering and branch tills.
- Add a device for each thing to show, from 1 to 50 per page. Monitors are listed first, then your other devices. Actuators cannot be added, because they have no uptime history. Use the arrows to set the order.
- Label is the name visitors see, up to 60 characters. It starts as the device's name: change it if that name is not meant for the public.
- Timezone sets the times shown on the page and where each day's bar starts.
- Range is how much history the bars and the availability figure cover: 30 days or 90 days. If your plan keeps less history than that, the page shows what it keeps.
- Show incidents lists the outages of the last 14 days, up to ten.
- Show hours prints each monitor's opening hours under it.
Create the page and copy its link from the page's card. It looks like
https://synacl.com/s/AbC123….
Status pages come with plans that include monitors. Your plan also sets how many pages can be enabled at once. When you reach that number, disable or delete a page to make room. A disabled page does not count.
What visitors see
- the title and intro, and one line for the whole page: All systems operational, Partial outage, Major outage, Maintenance in progress or Status unknown;
- for each item: its label, its state now, its availability over the range, and a bar per day;
- the opening hours and the recent incidents, if you switched them on;
- when the page was last updated, and Powered by Synacl.
An item's state is Up, Down, Closed · opens 12:45, Maintenance until 14:00, Paused or Unknown. Each day's bar is one of:
| Bar | Meaning |
|---|---|
| Up | No down time that day |
| Degraded | Some down time, but 99 % available or better |
| Down | Below 99 % available |
| Closed | The whole day was outside opening hours, in maintenance or paused |
| No data | No evidence either way that day |
The figures follow the same rules as in the app: closed, maintenance and paused time is not counted, and an outage stops where closed time begins. See how uptime is measured.
The page refreshes itself every minute, so figures are at most about a minute old. It follows the visitor's light or dark setting and works on a phone.
What visitors never see
Only your labels and the figures leave Synacl. A status page never shows device names (unless you used one as a label), device IDs, the URLs or addresses your probes check, readings or tags, SLA targets, your account or your email address, or any device you did not add.
Search engines are asked not to list the page. The link is the way in.
The link: rotate, disable, delete
Anyone with the link can open the page, so treat it like any shared link.
- Rotate link gives the page a new link. The old one stops working within about a minute. Use it when someone you shared the old link with should no longer see the page.
- Disable switches the link off: it answers "not found" until you Enable the page again, and then the same link works again.
- Delete removes the page for good.
Every status page and badge on your account is also listed under Settings → Public links.
Team members limited to some devices see a status page only if every device on it is one they can see, and can add only devices they can see. Creating and changing pages needs permission to edit devices.
Put it on your own site
A status page can be embedded in your own website with an iframe:
<iframe src="https://synacl.com/s/<token>" width="100%" height="640"
style="border:0" title="Service status"></iframe>
For a script, the same information is available as JSON at https://synacl.com/s/<token>.json.
Uptime badge
An uptime badge is one monitor's availability as an image, like a version badge on a code
project: your label on one side, 99.95% (30d) on the other. It refreshes itself, and nobody needs
a Synacl login to see it.
Open the monitor and choose Uptime badge. Set:
- Label, up to 32 characters. It starts as the monitor's name.
- Range: 24 hours, 7 days, 30 days or 90 days. The default is 30 days.
- Style, the same two as live badges.
Then Create badge and copy the Markdown, HTML or Image URL:
[](https://api.synacl.com/b/<token>)
The link around the image opens a page with the availability, the range and the monitor's state now. Times on that page are in UTC.
| Colour | Meaning |
|---|---|
| Green | Meets the monitor's SLA target. Without a target: 99.9 % or better |
| Yellow | Only without a target: 99 % to just under 99.9 % |
| Red | Below the SLA target. Without a target: below 99 % |
| Grey | No evidence yet for the range |
A monitor has one uptime badge. Rotate link and Revoke work as they do for
live badges, and so do the .txt and .json versions of the URL.
Uptime badges and tag badges share your account's 20 active badges. In Settings → Public links
an uptime badge is listed with its range, such as Uptime · 30 days.
Like a status page, the badge shows only your label and the figure: never the monitor's name (unless it is your label), its URL or address, or anything else in your account.