Provision a gateway's Wi-Fi

After flashing, the gateway needs network credentials:

  1. In the provisioning step, enter your Wi-Fi SSID and password. Use the eye button next to the password field to reveal what you typed and avoid a typo.
  2. The gateway connects, registers itself with Synacl, and appears in your Gateways list.
  3. Within ~90 seconds of its first message it shows online with signal strength.

If it doesn't appear, double-check the Wi-Fi credentials and that the network reaches the internet. You can open the gateway's console log over USB to watch it boot and join the network, or see gateway won't provision.

More in Gateways
Gateways overview
What a gateway does, the supported types, and its lifecycle.
Flash an ESP32 from your browser
Use Web Serial to load gateway firmware — no toolchain needed.
Update gateway firmware (OTA)
Push a new firmware version over the air from the gateway page.
Restart or reset a gateway
Reboot a gateway or clear its configuration remotely.
Picking sensors & pin validation
Add sensors to a gateway with automatic pin-conflict checking.
Gateway uplinks & network configuration
Wi-Fi, Ethernet, and cellular uplinks; parent/child chaining; and configuring a gateway's Ethernet port.